|
what is '1000 projects'?
'fullinterview.com' is a educational content website dedicated to finding and realizing final year projects for btech, be, mtech, mca students, here you can search, find your projects and get guidance from experts the below are the different technological projects.
visual Studio projects
.net projects,
asp projects,
c & ds projects,
c++ projects (all),
cold fusion projects,
delphi projects,
java projects,
perl projects,
php projects,
sql projects,
vc++ projects,
visual basic projects.
how it works?
well, everything on this site is submitted by the student and professional community. after you submit your project, it is being verified and approved by our administrator. after approval, other people can read/discuss it, save to favorites.
more number of projects?
here you can find morethan 1000 projects on different technologies, if u want to get more projects please visit our sister sites www.fullinterview.com & Chetanasprojects.com
Category Articles
When using the move command to move a single object by a given distance, which is the best of the following methods?
Added on Wed, Jan 6, 2010
a) Set osnap to END, pick the object, pick a base point then pick on the end of another object (b) Pick the object then key in the relative distance that it is to be moved (c) Pick the object then key in the absolute distance that it is to be moved ... Read More
The "select object" option "Previous" is best described by
Added on Wed, Jan 6, 2010
(a) Picks the single object drawn by the previous command (b) Picks the previous drawn single object (c) Picks the previously picked group of objects (d) Picks the previous object in a Window or Crossing selection Read More
The following two commands used one after the other BOUNDARY then pick inside an area ERASE ALL R LAST produces which of these results
Added on Wed, Jan 6, 2010
a) Changes layer to the Boundary layer then erases all items on the last layer (b) Calculates the area of the boundary and erases all the construction lines (c) Draws a polyline that touches the extremes of the area then erases all the recently drawn... Read More
What is the significance of using the command WBLOCK?
Added on Wed, Jan 6, 2010
(a) WBLOCK only works on blocks. (b) the block is written to disk and can be used later in other drawings. (c) the block is written to the current drawing file only, saving disk space. (d) the block can have attributes written to it later. Read More
The effect of the EXPLODE command when applied to a block is to?
Added on Wed, Jan 6, 2010
(a) reduce a block to it's constituent entities to allow editing. (b) return a block to it's created scale and rotation. (c) allow the editing of a block with different X,Y factors. (d) place constituent entities all onto the current... Read More
The use of blocks allows libraries of standard parts to be developed and saved for latter use. Blocks may BE STORED
Added on Wed, Jan 6, 2010
(a) on disk. (b) on disk, CDROM and the Internet. (c) on disk and CDROM. (d) on disk and the Internet. Read More
Which one of the following methods should be used to repeat a complex part in a drawing in order to minimise file size?
Added on Wed, Jan 6, 2010
(a) use the COPY command (b) use the MIRROR command (c) use the ARRAY command (d) create a BLOCK then use INSERT Read More
Which one of the following is a correct statement regarding AutoCAD blocks?
Added on Wed, Jan 6, 2010
(a) Blocks can only be inserted into a drawing if they already exist in that drawing. (b) A block can have no more than ten attributes. (c) The insert command looks first within the drawing for blocks and then to the disk. (d) Every block has to... Read More
The SETVAR command is used to?
Added on Wed, Jan 6, 2010
(a) configure the program settings to suit the various hardware devices (b) configure AutoCAD for use with a tablet menu (c) create an 'object set' for editing (d) change the values of the system variables Read More
If the system variable MIRRTEXT is set to 1, text is
Added on Wed, Jan 6, 2010
(a) mirrored (b) not mirrored (c) not reproduced in the mirror image (d) mirrored and reversed Read More
The system variable SPLINETYPE determines?
Added on Wed, Jan 6, 2010
(a) whether the 'curve' option of the PEDIT command produces a spline curve or a fit curve (b) whether editing functions are performed on the spline curve or on it's controlling frame (c) the accuracy of approximation of a spline... Read More
One effect of setting the value of MIRRTEXT=0 is that?
Added on Wed, Jan 6, 2010
a) text is displayed but not mirrored (b) text is displayed as a mirror (c) text is not displayed (d) only text can be mirrored Read More
Which one of the following is the BEST procedure for drawing a line from the point of intersection of a line and a circle?
Added on Wed, Jan 6, 2010
(a) Select the LINE command and then use object snap with the INS option. (b) Select the LINE command and then use object snap with the INT option. (c) Set a small SNAP value then select the LINE command and SNAP.to the intersection (d) Zoom in... Read More
When breaking a circle the break will occur in the
Added on Wed, Jan 6, 2010
(a) anti clockwise direction (b) clockwise direction (c) horizontal direction (d) shortest direction Read More
Which one of the following statements is False?
Added on Wed, Jan 6, 2010
(a) Plines can be filled but not outlined. (b) Plines can have either a consistent width or varying widths. (c) Plines can be made from lines and arcs. (d) Plines can be smoothed. Read More
Which of the following shapes CANNOT be drawn by the polygon command?
Added on Wed, Jan 6, 2010
(a) Square (b) Hexagon (c) Rectangle (d) Equilateral triangle Read More
The effect of freezing a layer is to?
Added on Wed, Jan 6, 2010
(a) make it invisible and prevent regeneration (b) make it invisible but allow regeneration (c) allow visibility and regeneration (d) display the layer but prevent editing of it Read More
AutoCAD has had the dreaded Model Space and Paper Space since R12. What is the main advantage of THE SYSTEM
Added on Wed, Jan 6, 2010
(a) It confuses students (b) It converts 2D drawings to 3D (c) It enables the CAD operator to set the scale of the (d) It saves space because it requires fewer layers. Read More
Why does AutoCAD allow you more than one layout?
Added on Wed, Jan 6, 2010
a) Different output devices. (b) Different sizes of output. (c) Different output orientation . (d) All of the above. Read More
Which of the following statements is true for AutoCad?
Added on Wed, Jan 6, 2010
(a) ZOOM ALL will reach beyond the drawing limits if an object is there. (b) ZOOM ALL only reaches out to the drawing limits. (c) There is not real difference between ZOOM ALL and ZOOM E. (d) ZOOM ALL makes all objects visible irrespective of the... Read More
The command to scale a paper space viewport to half the drawn size is?
Added on Wed, Jan 6, 2010
a) Zoom 0.5x (b) Zoom 1/2x (c) Zoom 2xp (d) zoom 0.5xp Read More
Which one of the following commands allows simultaneous pan and zoom?
Added on Wed, Jan 6, 2010
(a) ZOOM DYNAMIC (b) ZOOM EXTENTS (c) ZOOM CENTER (d) ZOOM PAN Read More
Which one of the following commands CANNOT be undone?
Added on Wed, Jan 6, 2010
(a) XREF (b) SETVAR (c) SAVE (d) LIST Read More
The MAXIMUM number of commands whose effect can be undone by the UNDO command is?
Added on Wed, Jan 6, 2010
(a) 256 (b) 1000 (c) all the command issued since the drawing was first created (d) all commands issued since the drawing was last loaded into the drawing editor Read More
Which one of the following BEST defines a "prototype" or "template" drawing?
Added on Wed, Jan 6, 2010
(a) the drawing which is currently being edited by AutoCAD (b) a drawing used to store a library of standard symbols (c) a means of setting the initial drawing environment for new drawings (d) a file which holds details of the display, digitiser,... Read More
In order for the grid command to work correctly two settings have to be established.
Added on Wed, Jan 6, 2010
a) The correct limits set and an appropriate setting of the grid value set (b) Limits set to ON and an appropriate setting of the grid value set (c) Snap and Osnap set (d) Gridmode and osmode both set to 1 Read More
How many entity colours does AutoCAD support?
Added on Wed, Jan 6, 2010
(a) 255 (b) 16 (c) unlimited (d) 64 Read More
A house measures 15000 mm x 8000 mm in plan view. When drawing the plan view only which one of the following sets of limits would be BEST to use?
Added on Wed, Jan 6, 2010
(a) 0,0/20000,15000 (b) 0,0/20,15 metres (c) -2000,-2000/20000,15000 (d) -2000,-2000/15000,8000 Read More
The effect of QTEXT being ON is to?
Added on Wed, Jan 6, 2010
(a) place text directly in the drawing as defined (b) speed up drawing regeneration by replacing text with rectangles (c) use simplified text font to replace complex text font (d) allow automatic line spacing of textual input Read More
The text option that prompts the user for two endpoints and then automatically calculates the text height
Added on Wed, Jan 6, 2010
Question : The text option that prompts the user for two endpoints and then automatically calculates the text height and positions the text between the two points is chosen from this AutoCAD prompt Align/Fit/Center/Middle/Right/TL/TC/TR/ML... Read More
When is a space NOT interpreted as the enter key?
Added on Wed, Jan 6, 2010
(a) When entering text. (b) When using the PEDIT command. (c) When selecting objects. (d) The space is always an alternative to the enter key. Read More
Which one of the following could be an AutoCad drawing file?
Added on Wed, Jan 6, 2010
(a) DWG.PLAN (b) PLAN.DWG (c) DRAW.FLE (d) FILE.TXT Read More
Which one of the following best describes a "user co-ordinate System"?
Added on Wed, Jan 6, 2010
(a) The pair of co-ordinate points which define the lower left and upper right corners of the drawing boundary (b) A series of co-ordinate points stored as variables for later use in the drawing (c) A co-ordinate system whose origin is located... Read More
Absolute co ordinates are measured from the
Added on Wed, Jan 6, 2010
(a) current UCS origin. (b) last point entered. (c) lower left hand corner as set by LIMITS command. Read More
The position of a mouse on a surface is NOT directly related to the position of the screen cursor. This makes the mouse unsuitable for
Added on Wed, Jan 6, 2010
(a) Selecting two points on the screen for a line draw operation. (b) Tracing an existing drawing. (c) Selecting menu items on the screen. (d) Sketching. Read More
Which one of the following is an AutoCAD absolute point co-ordinate?
Added on Wed, Jan 6, 2010
(a) @361,270 (b) 60<90 (c) 361,270 (d) None of the above Read More
When drawing a digital watch measuring 30mm x 25mm, which one of the following would be the BEST set of drawing limits to use?
Added on Wed, Jan 6, 2010
(a) 0,0/40,35 (b) 0,0/30,25 (c) 0,0/100,100 (d) 0,0/297,210 Read More
ou are designing a floor plan and know the length and angle of one of the wall segments to be 1500mm
Added on Wed, Jan 6, 2010
Question : ou are designing a floor plan and know the length and angle of one of the wall segments to be 1500mm and 30 degrees. This is to be followed by a wall 2000mm long at 90 degrees to the first. Which one of the following is the... Read More
The shape above is based on a 10 unit module. which is the correct set of codes to draw this shape,
Added on Wed, Jan 6, 2010
Question : The shape above is based on a 10 unit module. which is the correct set of codes to draw this shape, starting at the lower left and moving anti clock wise ... Read More
|
