Wireless electrical apparatus Controlling System Using Bluetooth Communication

[naveen]

Wireless electrical apparatus Controlling System Using Bluetooth Communication
Title of the project: Wireless electrical apparatus Controlling System Using Bluetooth Communication
Domain: Embedded Systems Design, Wireless Comm.
Software: Embedded C, Keil, Proload
Microcontroller: AT89S52
Power Supply: +5V, 750mA Regulated Power Supply
Display: a) LCD b) LED
LCD: HD44780 16-character, 2-line (16X2)
Communication Device: RF Module 433MHz
Crystal: 11.0592MHz
Applications: Home appliances, industries, manufacturing Companies, shopping malls etc.
ABSTRACT
Conceived initially by Ericsson, before being adopted by a myriad of other companies, Bluetooth is a standard for a small radio chip to be plugged into computers, printers, mobile phones, etc. A Bluetooth chip is designed to replace cables by taking the information normally carried by the cable, and transmitting it at a special frequency to a receiver Bluetooth chip, which will then give the information received to the computer, phone whatever.
It is one of real time applications in industry now a days all electrical devices in Industry controlled by manually, But in industry so many electrical devices is there. To control all electrical devices we need lot of “ MAN POWER “ if manpower increases Maintenance cost also increases; this is one of the drawbacks of industry, So to avoid such type of drawback we should need some WIRELESS controlling systems,
One of wireless communication system is Bluetooth communication system. That is why we have selected Bluetooth, This is not only used in industry but also used in Domestic Purpose as home appliances controlling using Bluetooth remote, some persons who are unable to walk to switch board such type of persons need this type of project and also Who are old persons, why because you can switch ON/OFF load with remote, without moving away from your place,



Find The Attached Doc Below.....