Current time: 05-23-2012, 02:12 AM Hello There, Guest! (LoginRegister)


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fabrication of Compressorless Solar Energy Refrigerator
11-13-2010, 05:22 AM
Post: #1

Fabrication of Compressorless Solar Energy Refrigerator
Abstract
:

Refrigerator is the machine used to produce and maintain temp below that of the ambient temperature. The compressor less solar energy refrigerator works on the peltier effect by using photovoltaic cells. The photovoltaic module in the array converts sunlight into the electricity which helps in the charging of the battery. The rechargeable batteries are used to store electric energy for use during unavailability of the sunlight in the night or during poor weather. Peltier effect creates a heat difference from an electric voltage. It occurs when a current is passed through two dissimilar metals that are connected to each other by two junctions (peltier junction).The current derives a transfer of heat from one junction to the other, one junction cools off while the other heats up. The cooling junction can be used as refrigerator which will absorb the heat from the desired space.
Find all posts by this user
Quote this message in a reply
Post Reply 


[-]
Share/Bookmark (Show All)
Facebook Linkedin Technorati Twitter Digg MySpace Delicious

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  solar oven austain9 1 275 01-23-2012 03:11 AM
Last Post: pmemhhops
  Fabrication of Drill Jig Academic_Project Reports 0 479 12-04-2010 03:31 AM
Last Post: Academic_Project Reports
  Energy saving Academic_Project Reports 0 188 12-04-2010 01:40 AM
Last Post: Academic_Project Reports
  Unmanned Solar Power Aircraft Project Academic_Project Reports 0 272 12-04-2010 01:27 AM
Last Post: Academic_Project Reports
  Design of solar Power Panel Academic_Project Reports 0 211 12-04-2010 01:25 AM
Last Post: Academic_Project Reports
  DESIGN FABRICATION AND PERFORMANCE EVALUATION OF GARDEN TILLER full report born_for projects 0 124 11-17-2010 05:45 AM
Last Post: born_for projects
  Fabrication of lathe coolant pump with fitting arrangement born_for projects 0 159 11-17-2010 05:37 AM
Last Post: born_for projects
  DESIGN AND FABRICATION OF ABS SIMULATION KIT born_for projects 0 224 11-17-2010 05:36 AM
Last Post: born_for projects
  Design And Fabrication Of Regenerative Braking System born_for projects 0 451 11-17-2010 05:07 AM
Last Post: born_for projects
  DESIGN DEVELOPMENT AND FABRICATION OF HYDRAULIC ESCALATOR full report born_for projects 0 218 11-17-2010 05:06 AM
Last Post: born_for projects

Forum Jump:


User(s) browsing this thread: 1 Guest(s)